What your bufferbloat grade means
Bufferbloat is the extra delay that builds up when your connection is busy and packets wait in oversized buffers in your modem or router. The grade measures only that extra delay — your loaded latency minus your idle latency — because that is what you feel when someone else starts a download. For the background on why buffers bloat in the first place, see our bufferbloat guide.
| Grade | Added latency | Video calls | Gaming |
|---|---|---|---|
| A | Under 20 ms | Smooth, even during big downloads. | No lag spikes from other traffic. |
| B | 20–60 ms | Fine; a slight delay at worst. | Small spikes during heavy transfers. |
| C | 60–150 ms | Noticeable delay and talking over each other while the line is busy. | Lag whenever someone downloads or uploads. |
| D | 150–400 ms | Stutters, freezes and dropped words under load. | Hard to play while the line is busy. |
| F | 400 ms or more | Calls break up or drop while anything transfers. | Unplayable during transfers; pages hang too. |
How this test measures bufferbloat
The test starts with your idle latency: the median of a series of small round trips to the nearest Cloudflare data center while the line is quiet. It then saturates your download with several parallel connections, and after that your upload, while latency probes keep running. The median of the probes in each phase is your loaded latency for that direction.
Added latency is loaded minus idle, and your grade uses whichever direction is worse. The results show both directions, and they often differ a lot.
Upload bufferbloat is frequently the worse of the two. On cable and DSL, upload capacity is a fraction of download, so a full buffer drains far more slowly: 1 MB of queued data takes 80 ms to clear at 100 Mbps, but 800 ms at 10 Mbps. That is why a cloud backup or a video upload can wreck a call that a big download barely touches.
How to fix bufferbloat
The fix that works is Smart Queue Management (SQM): queueing algorithms such as fq_codel and CAKE that keep buffers short and give small, time-sensitive packets a fair turn instead of a place at the back of a long line.
- Find SQM in your router. Menus label it differently: SQM, Smart Queue, Smart Queues, or a QoS mode such as Adaptive QoS. Not every QoS mode is real queue management, so look for fq_codel or CAKE, or a setting that asks for your download and upload speeds.
- Set the speeds slightly below what you measure. Enter about 85–95% of your wired result in each direction. Shaping just under your line rate moves the queue out of the modem and your ISP’s equipment, where you have no control over it, and into your router, where SQM keeps it short. With 300 Mbps down and 20 Mbps up measured, 90% means 270 and 18.
- Re-test and adjust. Still graded B or worse? Lower the limits by a few percent. Already at A? Try nudging them up to win back some speed.
- No SQM on your ISP’s gateway? Put it in bridge mode (some ISPs call it modem mode) and connect a router that supports SQM behind it — including routers running open-source firmware such as OpenWrt. If the gateway’s Wi-Fi stays on in bridge mode, turn it off so you aren’t running two networks.
Why device-priority QoS alone often doesn’t help. Many routers offer QoS that puts your console or work laptop first. Priority rules can only reorder packets queued in the router, and without shaping below your line rate the queue builds in the modem or at your ISP instead, out of the router’s reach. Prioritizing a device also does nothing when that device’s own download is what fills the line.
Why a faster plan usually won’t fix it
Bufferbloat is a queue problem, not a capacity problem. Game launchers, system updates and cloud backups take all the bandwidth they can get on any plan, so a faster line fills up just like a slow one — and if the buffers are oversized, the queue builds again.
A faster tier can shrink the delay somewhat, since the same buffer drains more quickly, but it rarely turns a D into an A. SQM often does, on the router you already have if it supports it. If you are weighing an upgrade for gaming or calls, check your grade first; our guide to internet speed for gaming explains what actually matters there.
Re-test after every change
Run the test before you change anything and keep that result as your baseline; the site keeps a history of your results in this browser. Then change one thing at a time and re-test on the same wired device at a similar time of day.
Compare the added latency in each direction, not just the letter: going from +180 ms to +70 ms is real progress even though it only moves you from D to C. Once you are at A or B, the quicker ping test is enough for spot checks, and our guide on how to reduce ping covers what’s left: Wi-Fi, distance and server choice.
Common questions
What is bufferbloat?
Bufferbloat is the lag that builds up when your connection is busy: oversized buffers in your modem or router hold packets in a long queue, so latency jumps from tens of milliseconds to hundreds. It explains calls that stutter and games that lag whenever someone downloads. Our bufferbloat guide covers it in depth.
What is a good bufferbloat grade?
A or B. An A means under 20 ms of added latency — nothing you’ll notice, even during heavy downloads. At C and below, calls and games suffer whenever the line is busy.
Why is my upload bufferbloat worse than my download?
On cable and DSL, upload is usually much slower than download, so a full buffer takes far longer to drain. The upload queue also sits in your own modem, which often does little to manage it. SQM with an upload limit just below your measured speed usually fixes it.
Does bufferbloat affect gaming?
Yes. Your ping can look perfect on a quiet line, then jump by hundreds of milliseconds the moment someone else downloads or uploads. A grade of A or B keeps your game responsive while the rest of the household is busy online.
Will a new router fix bufferbloat?
Only if it supports Smart Queue Management (fq_codel or CAKE) and you turn it on with sensible speed limits. A new router without SQM can be just as bloated as the old one.
Why does my bufferbloat grade change between tests?
Wi-Fi, other traffic on your network and busy periods at your ISP all shift loaded latency. Test a few times on a wired connection with other devices idle; the grade that keeps coming back is the one to trust.