How to calculate download time
File sizes are counted in bytes, but connection speeds are sold in bits per second, and one byte is eight bits. So convert the file to megabits, then divide by your speed:
- Convert the file size to megabytes (MB): 1 GB = 1,000 MB and 1 TB = 1,000,000 MB.
- Multiply by 8 to get megabits.
- Divide by your speed in Mbps (1 Gbps = 1,000 Mbps). The answer is in seconds; divide by 60 for minutes or by 3,600 for hours.
If your speed is already in MB/s, as download managers and game launchers show it, skip the × 8 and divide megabytes by MB/s. Our Mbps converter translates between all the units, and Mbps vs MB/s explains why there are two.
Worked examples
A 50 GB game at 100 Mbps: 50 × 1,000 = 50,000 MB; × 8 = 400,000 megabits; ÷ 100 = 4,000 seconds, which is 1 hour, 6 minutes and 40 seconds. At a realistic 90 Mbps it takes about 1 hour 14 minutes.
| Download | Speed | At full speed | At ~90% |
|---|---|---|---|
| 1 GB file | 50 Mbps | 2 min 40 s | about 3 min |
| 4 GB HD movie | 25 Mbps | 21 min 20 s | about 24 min |
| 50 GB game | 100 Mbps | 1 h 6 min 40 s | about 1 h 14 min |
| 100 GB game | 300 Mbps | 44 min 27 s | about 49 min |
| 1 TB backup | 1 Gbps | 2 h 13 min 20 s | about 2 h 28 min |
GB or GiB? Why the same file shows two sizes
This calculator, game stores and drive makers use decimal units: 1 GB is 1,000,000,000 bytes. Windows File Explorer counts in binary, where its “GB” is really a gibibyte (GiB) of 1,073,741,824 bytes — about 7% more. macOS uses decimal units, like the stores.
So the same file looks about 7% smaller in Windows: a 50 GB file shows as roughly 46.6 GB, and a 2 TB drive as about 1.82 TB. If your size comes from Windows, multiply it by about 1.074 before calculating, or the estimate will run a few minutes short on big files.
Why real downloads take longer than the calculator says
The realistic estimate assumes about 90% of your line speed, because packet headers, acknowledgments and encryption use part of every connection. Beyond that, a download can only go as fast as its slowest link:
- The server or CDN. Some servers limit each download’s speed, and big releases can overload them on launch day.
- Wi-Fi. The wireless hop is often slower than the line itself; test wired to see the difference.
- Everyone else on the line. Streams, video calls, updates and backups all share the same connection.
- Your disk. On very fast lines the drive can become the limit: a gigabit download arrives at up to 125 MB/s, and game launchers often decompress and install files as they go.
- Launcher and storefront limits. Some apps have a download-speed cap in their settings, and some services slow downloads at busy times.
- A VPN. Traffic detours through the VPN server, and a distant or busy one can cap your speed well below your line’s.
How to make downloads faster
- Plug in. An Ethernet cable takes Wi-Fi out of the equation.
- Pause other traffic. Stop streams, backups and other downloads while the big one runs.
- Download off-peak. Late night and early morning are usually quieter on your ISP’s network and on the servers; many launchers can schedule downloads overnight.
- Pick a closer server. If a launcher or site lets you choose a download region or mirror, choose the nearest one.
- Check what your line really delivers. Run a download speed test and put the result into the calculator. If the line itself is the bottleneck, Is 300 Mbps fast? shows what a mid-range plan handles.
Upload time is the same math
Sending a file uses the same formula with your upload speed instead. On cable and DSL plans, upload is often a small fraction of download, so uploads take much longer: a 3 GB video takes 40 minutes at 10 Mbps up, but 10 minutes at 40 Mbps. Measure yours with the upload speed test.
Common questions
How long does it take to download 1 GB?
1 GB is 8,000 megabits, so at full speed it takes 5 min 20 s at 25 Mbps, 1 min 20 s at 100 Mbps and 8 seconds at 1 Gbps. Allow about 10% longer in practice.
How long does it take to download 100 GB?
100 GB is 800,000 megabits: 2 h 13 min 20 s at 100 Mbps, 26 min 40 s at 500 Mbps and 13 min 20 s at 1 Gbps, at full speed. Real downloads usually take somewhat longer.
How do you calculate download time?
Multiply the file size in megabytes by 8 to get megabits, then divide by your speed in Mbps; the result is in seconds. For example, 2 GB at 50 Mbps is 2,000 × 8 ÷ 50 = 320 seconds, or 5 min 20 s.
Why does my download show MB/s when my plan is in Mbps?
Plans are sold in megabits per second, while downloads are measured in megabytes per second, and a byte is 8 bits. Divide your plan speed by 8: a 100 Mbps line tops out at 12.5 MB/s.
Why is my download slower than the calculator says?
The calculator assumes your whole line is available to one download. In practice the server, Wi-Fi, other traffic on your line or your disk often set a lower ceiling; the realistic figure allows for protocol overhead, not for those.