Why is my internet so slow?
Slow internet always has a location: your device, your Wi-Fi, your router, your line, or the server at the other end. Check them in that order and you’ll usually find the culprit in about 15 minutes.
Start with one test, and know which kind of slow you have
Before you change anything, run the full speed test on the device that feels slow. It takes about 30 seconds and gives you more than one number: download, upload, latency under load (shown as a bufferbloat grade from A to F) and packet loss.
Those numbers separate three different problems that all get called a “slow internet connection”:
- Low throughput. Downloads crawl, video drops to low resolution, and the download result sits well below your plan. Usually Wi-Fi, an old device or the line itself.
- Lag. The speed result looks fine, but pages hesitate, calls freeze and games stutter, especially when someone else is online. Usually bufferbloat or a weak Wi-Fi link.
- Stalls. Things load, stop, then catch up. Usually packet loss from interference, a damaged cable or a fault on the line.
Write the result down with the time and whether you were on Wi-Fi or a cable. Every step below is a comparison against this first test, and a log of dated results is exactly what your ISP will ask for if it comes to a support call.
Step 1: Rule out the device
The fastest check is a second device. Run the same test on another phone or laptop in the same spot. If your phone gets 300 Mbps and the laptop beside it gets 40, the laptop is the bottleneck, and nothing about your router or plan needs to change.
On the slow device, work through these in order:
- Turn off the VPN and test again. A VPN sends everything through its own server first, and many cap throughput well below a fast plan.
- Pause cloud backups, file sync, game launchers and system updates. They are the most common hidden users of bandwidth, and uploads hurt everything else on the line.
- Restart the device. It clears stuck network drivers and runaway background processes, and it costs nothing.
- On a wired computer, check the link speed in the network adapter’s status. It should read 1.0 Gbps or more. A result stuck around 90–95 Mbps on a faster plan is the classic sign of a 100 Mbps link: an old or damaged cable, a bent connector or an old port.
- Consider the radio. Older laptops and budget phones can top out at 100–200 Mbps over Wi-Fi, however good the network is. If two devices disagree, believe the newer one.
Step 2: Rule out the Wi-Fi
Wi-Fi is the most common bottleneck in a home network, so give it a fair trial. Plug a laptop into the router with an Ethernet cable and run the test. Then unplug, go to the room where things feel slow, and run the Wi-Fi speed test on the same laptop.
- Wired fast, Wi-Fi slow even near the router: the band you’re on, channel congestion or the router’s radio. See why Wi-Fi is slower than wired.
- Wired fast, Wi-Fi fast near the router but slow in far rooms: a coverage problem. Placement, channels, mesh and access points are covered in how to improve your Wi-Fi signal.
- Wired slow too: the Wi-Fi is not your problem. Move on to the router and the line.
No computer with an Ethernet port? Stand a few feet from the router with a recent phone on the 5 GHz band. For plans up to a few hundred Mbps, that comes close to a wired baseline.
Look at latency as well as speed. If jitter on Wi-Fi is much higher than on the cable, the radio link is noisy, and that hurts calls and games long before it hurts downloads.
Step 3: Check the router and modem
If wired results are slow too, look at the equipment where the internet enters your home. Some providers supply one combined box (a gateway in the US, often called a hub in the UK); others supply a separate modem and router.
- Restart them properly: unplug the power, wait 30 seconds, plug the modem in first and wait for its lights to settle, then the router. Our guide on how to restart your router and modem covers the details, and why a restart is not the same as a reset.
- Check for heat. A router shut in a cabinet, stacked on other electronics or sitting in direct sun can slow down or crash when it overheats. Give it open air.
- Read the lights. A blinking or amber online, internet or DSL light means the modem isn’t holding a stable connection to your provider. That’s a line problem, not a setting.
- Update the firmware from the router’s app or admin page. Updates fix stability and performance bugs as well as security holes.
- Check the age. Equipment older than your plan may not be able to carry it: an older cable modem may not support today’s faster tiers, and an old router may have 100 Mbps ports or a slow processor. Your ISP can confirm whether its own equipment supports your speed.
Then look at the bufferbloat grade from your first test. A C or worse means latency balloons whenever the line is busy, and that alone makes a fast connection feel slow every evening. The cure is a router feature called smart queue management (SQM). Our bufferbloat guide explains it, and the bufferbloat test measures the difference before and after.
Step 4: Check your line and your plan
With a wired result in hand, compare it with your plan. A result a little under the headline figure is normal: plans are sold at their maximum, and protocol overhead takes roughly 5–10%. In the US, the broadband label your provider publishes for each plan lists its typical speeds, which is a fairer yardstick than the advertised number.
A single test can hide three line problems, so check each one:
- Evening congestion. Test wired early in the morning and again between about 7 and 11 pm. Fast in the morning but slow every evening points at a shared network that fills up at peak time, which is common on cable and fixed wireless.
- Packet loss. Run the packet loss test. It sends steady, modest traffic for about 15 seconds and reports how many packets had to be resent on the way to you. A healthy wired line usually shows close to 0%. Anything above about 1% on a quiet line is worth chasing, often to a loose coax connector, a cheap splitter or a noisy phone line.
- Outages and faults. Check your provider’s status page or app over mobile data, or ask a neighbor on the same provider. Partial outages often show up as very slow service rather than none at all.
Read your plan’s terms too. Some plans slow you down after a monthly data allowance, and some fixed-wireless and satellite plans deprioritize your traffic when the local network is busy. Your account page usually shows usage and any limit that applies.
If your wired, quiet-line result is still far below your plan, contact your ISP with your log: dates, times, wired results and packet loss. If the plan itself is the ceiling, check how much speed you actually need before paying for more. For reference, the FCC’s broadband benchmark is 100 Mbps down and 20 Mbps up.
Step 5: Check the other end
Sometimes your connection is fine and the slowness belongs to the service you’re using. Our test measures against Cloudflare’s nearest data center, usually only a few milliseconds away. If it shows full speed while one website, game store or streaming app crawls, the bottleneck is that service or the route between it and your ISP.
- One download is slow. Many servers limit the speed of each connection. A speed test uses several parallel streams, so it will almost always beat a single file transfer from a busy server.
- One site or game is slow at peak times. Its servers, or the link between them and your provider, may be congested. Try again later, or choose a different server or region if the app lets you.
- Pages pause before loading, then appear quickly. That pause is often DNS, the lookup that turns a site name into an address. Switching your router or device to a different public DNS resolver is a two-minute experiment.
Once you know where the bottleneck is, the upgrade-type fixes, from cabling to hardware to switching technology, are in how to improve your internet speed.
Why is my internet so slow all of a sudden?
If the connection was fine yesterday and slow today, something changed. These are the usual suspects, roughly in the order worth checking:
- An outage or line fault. Check the provider’s status page and the modem lights first. Storms, construction work and maintenance cause partial outages that look like slowness.
- A device hogging bandwidth. A console downloading a 100 GB game, a PC installing updates, a phone backing up its photos. Many router apps list connected devices, and some show live usage per device.
- Updates and backups. Operating systems, game launchers and cloud storage apps start large transfers on their own. Uploads do the most damage, because upload capacity is usually much smaller than download.
- A router that needs a restart or is overheating. If a restart fixes things for a day or two and the slowness returns, the router may be running hot or starting to fail.
- Congestion or a data limit. A new evening slowdown can mean your provider’s local network is busier than it used to be, or that you’ve passed a data allowance.
- DNS trouble. If sites are slow to start loading but speed tests look normal, the DNS resolver may be struggling.
- Someone else on your Wi-Fi. An unfamiliar name in the device list is a reason to change the Wi-Fi password and make sure WPA2 or WPA3 security is on.
Match the symptom to the cause
If you already know how the problem behaves, this table points you to the likely cause and the quickest check.
| Symptom | Likely cause | What to check |
|---|---|---|
| Slow on Wi-Fi, fast on a cable | Wi-Fi signal, band or congestion | Test next to the router on 5 GHz, then in the slow room |
| Slow on one device only | That device: VPN, updates, old radio | Test a second device in the same spot |
| Wired result stuck near 90–95 Mbps on a faster plan | A 100 Mbps link somewhere | Adapter link speed, cable, router port |
| Fast in the morning, slow every evening | Congestion on a shared network | Wired tests at both times |
| Speed fine, but calls and games lag when others are online | Bufferbloat | Bufferbloat grade; turn on SQM |
| Loads stall, video quality drops, calls glitch | Packet loss | Packet loss test; cables and splitters |
| Sites pause before loading, then load fast | Slow DNS | Try a different DNS resolver |
| One site or game slow, speed test fine | That server or its route | Another server, region or time of day |
| Everything slow, modem light blinking | Line fault or outage | Provider status page, then support |
Common questions
Why is my internet slow when the speed test is fast?
Because the problem isn’t throughput. Check latency under load (the bufferbloat grade), packet loss, and whether the slow service is one particular site or server; a test against a nearby server can be fast while a busy or distant one is not.
How do I fix slow internet?
Find the bottleneck first: wired versus Wi-Fi, one device versus another, morning versus evening. Then fix that link, whether it’s Wi-Fi placement, a router restart, smart queue management or a call to your ISP with your results.
Why is my internet slow at night?
Evening is peak time, when shared networks such as cable and fixed wireless are busiest. If wired tests are consistently fine in the morning and slow between about 7 and 11 pm, the congestion is on the provider’s side, and your logged results are the evidence.
Can my router make my internet slow?
Yes. An overheating, outdated or badly placed router can slow Wi-Fi and wired connections alike, and older routers may not be able to route a fast plan at full speed. Restarting and updating the firmware are free first steps; replacement comes last.
Is my ISP throttling my internet?
Possibly, if you’ve passed a data allowance or your plan allows deprioritization at busy times. Compare wired tests across the day and read your plan terms; ordinary peak-time congestion is the more common explanation.
Does restarting the router really help?
Often, yes. It clears memory leaks, stale connections and a modem that has settled on a poor line sync. If you need to restart more than about once a week, something underneath, such as heat, firmware or the line, needs fixing.