afasttest

How to reset or restart your router and modem

8 min read · Updated November 20, 2026

Most people who search for how to reset a router actually need a restart: a two-minute fix that loses nothing. A factory reset wipes your settings and is a last resort — here’s how to do each one correctly.

Restart vs reset: know which one you need

The two words get used interchangeably, even by support scripts, but they mean very different things. Restarting — also called rebooting, power-cycling or a “soft reset” — switches the device off and on again. Everything you’ve set up survives.

A factory reset — sometimes called a “hard reset” — erases the device’s settings. Your Wi-Fi comes back under the default name and password printed on the label, and every phone, laptop, TV and smart plug in the house has to be reconnected by hand.

Restart (reboot, power-cycle)Factory reset
What it doesTurns the device off and on, clears its memory and reconnects to your ISPErases every setting and restores factory defaults
What you loseNothing but 2–5 minutes of internetWi-Fi name and password, admin password, port forwards, parental controls and, on some connections, your ISP login
HowUnplug the power for 30 seconds, or tap Restart in the app or admin pageHold the recessed Reset button with a pin, often for 10–30 seconds (check the manual)
Use it whenSlow speeds, dropouts, Wi-Fi with no internet — the first fix for almost anythingForgotten admin password, settings beyond repair, selling the device, or support asks you to

Troubleshooting slow or flaky internet? You want a restart.

Why a restart fixes so much

Routers and modems are small computers that run for months without a break. Their memory fills up, connection tables collect stale entries, firmware bugs pile up, and the device can lose track of its session with your ISP. A restart throws all of that away, makes the modem negotiate its connection from scratch, and on many routers picks fresh Wi-Fi channels. That’s why it so often cures slow speeds, Wi-Fi with no internet, and devices that suddenly can’t get online.

What it can’t fix: an outage in your area, a damaged line, a plan too slow for your household, or Wi-Fi that doesn’t reach the room. If the problem returns within hours or days, the restart treated a symptom, not the cause.

How to restart a separate modem and router

If you have two boxes — a modem where the cable, phone line or fiber comes in, and a router that makes your Wi-Fi — the order matters. The router asks the modem for an internet connection as it starts up. If the router wakes first, it can come up without internet and sit there until it retries.

  1. Unplug the power from both the modem and the router. Leave the coax, phone or fiber cable connected.
  2. Wait 30 seconds.
  3. Plug the modem back in and wait until its internet or online light is steady. That usually takes 1–3 minutes, occasionally up to 5; the exact light and color vary by model.
  4. Plug the router back in and give it another 1–2 minutes to boot and bring the Wi-Fi back.
  5. Reconnect a device and run a speed test to confirm everything is back to normal.

Fiber homes usually have an optical network terminal (ONT), a small box on the wall where the fiber ends. Treat it as the modem: ONT first, router second. In Australia, most NBN connections other than FTTN and FTTB have a separate NBN connection box that plays the same role.

If the modem or ONT runs on a battery backup, unplugging the wall power won’t switch it off. You can usually leave it running and restart just the router; otherwise, follow its manual or your ISP’s instructions.

Restarting a gateway, ISP hub or mesh system

Many homes have one box that does both jobs, usually called a gateway — or, in the UK, the hub. Restarting it is simpler: unplug it, wait 30 seconds, plug it back in. Gateways do more work at startup, so allow up to 5 minutes for the lights to settle and the Wi-Fi to return. If your own router sits behind the gateway, restart the gateway first, then your router.

Mesh Wi-Fi adds one more step:

  1. Unplug the modem or gateway, the main mesh unit (the one wired to the modem) and every satellite unit.
  2. After 30 seconds, power the modem and wait until it’s online.
  3. Power the main mesh unit and wait until its light shows it’s connected, usually a couple of minutes.
  4. Power the satellite units. They rejoin the main unit on their own; give them a few minutes.

Most mesh apps have a “restart network” option that reboots every unit in the right order — the easiest route if yours has one.

Restart from the app or admin page instead

You don’t have to crawl behind the TV. Many ISP apps and almost every mesh app have a restart button, and every router has one in its web admin page. A software restart is also slightly kinder to the device: it shuts down properly instead of losing power mid-task.

  1. Find the router’s address. It’s usually printed on the label, often 192.168.0.1 or 192.168.1.1. On Windows, run ipconfig and look for Default Gateway; on a Mac, open System Settings › Wi-Fi › Details › TCP/IP and look for Router; on an iPhone, tap the info button next to your Wi-Fi network.
  2. Type that address into a browser on a device connected to your network, and sign in with the admin password — the one on the label, unless you changed it.
  3. Look for Reboot or Restart, usually under System, Maintenance, Administration or Advanced.

Restarting the router from its own page doesn’t restart a separate modem. If the problem is the connection to your ISP, power-cycle the modem as well.

How to factory reset a router (and what to have ready)

Reset only for a reason: a forgotten admin password, settings tangled beyond repair, selling or returning the device, settings you suspect someone changed, or a request from your ISP’s support. Before you press anything, gather what you’ll need afterward.

  • Your Wi-Fi name and password, exactly as they are now (both are case-sensitive). Set them back the same and every device reconnects on its own.
  • Your ISP connection details, if your connection needs them. Some DSL and fiber services use a login (a PPPoE username and password) or a VLAN ID. A router you bought yourself forgets these, and the internet won’t return until you re-enter them. ISP-supplied routers often set themselves up again automatically, but not always — check your ISP’s setup page first.
  • Anything you customized: port forwards for games or cameras, parental controls, custom DNS, a guest network. Screenshot those pages, or use the router’s backup-settings option if it has one.

Then do the reset:

  1. Leave the router powered on, unless the manual says otherwise.
  2. Find the recessed Reset button, usually on the back or bottom, and press it with a straightened paper clip or a SIM tool.
  3. Hold it for as long as the label or manual says — commonly 10 to 30 seconds — until the lights flash or change.
  4. Release it and wait several minutes while the router restarts with factory settings.

Afterward, connect by Ethernet or to the default Wi-Fi name on the label, sign in with the admin login printed there, and change the admin password. Set your old Wi-Fi name and password, re-enter any ISP details, install any firmware update, then restore your custom settings. Finish with a speed test.

Three cautions. Some routers share one button between Reset and WPS, where a short press does something else, so check the manual. Factory-resetting an ISP modem or gateway rarely fixes a connection problem, because its line settings come from the ISP; let support guide that one. And a saved backup is quicker to restore but can bring back whatever was broken — if you suspect tampering, set things up fresh with new passwords.

How often should you restart your router?

If everything works, you don’t need a schedule. An occasional restart — monthly, say, or whenever something feels off — does no harm, and it’s the first thing any support line will ask you to try.

Many routers offer a scheduled reboot, say every night at 4 a.m. That’s a reasonable band-aid for hardware that gets sluggish after a few days, but treat it as a warning sign. A device that needs restarting that often usually has a firmware bug, is overheating or is wearing out. Install any firmware update, give it room to breathe (not in a closed cabinet or stacked on another warm box), and plan a replacement if neither helps.

When restarting doesn’t fix it

Measure before you restart and again afterward; it turns a guess into a diagnosis. Run the full speed test on a wired device if you can, note the results, restart, wait a few minutes and test again. Then match what you see:

  • Normal after the restart, then it degrades again within hours or days: the router or modem is the likely culprit. Signs of failing hardware include random reboots, a box that’s hot to the touch, lights blinking red or amber, and Wi-Fi that vanishes while wired devices keep working.
  • No change, wired or wireless: check your ISP’s status page or app for an outage. Then open the modem’s status page — on many cable modems it’s at 192.168.100.1 — and look for lost sync, climbing error counts or signal levels flagged as out of range; those point at the line, not your hardware. Steady loss on the packet loss test over a wired connection is evidence your ISP needs to see.
  • Wired is fine, Wi-Fi isn’t: the internet line is healthy and the problem is in the air. See how to improve your Wi-Fi signal and why Wi-Fi keeps disconnecting.
  • Fast, but laggy whenever someone else uses the line: that’s bufferbloat, and no restart will touch it. What is bufferbloat explains the fix.

For a broader checklist, why is my internet so slow walks through every likely cause in order.

Common questions

Will resetting my router delete my Wi-Fi password?

A factory reset will: the network returns to the default name and password on the label. A restart — unplugging it, or Reboot in the app — changes nothing.

How long should I unplug my router?

30 seconds is plenty. That’s long enough for the device to power down completely; waiting longer doesn’t help in normal troubleshooting.

Should I restart the modem or the router first?

Power the modem first and wait until it’s online, then the router. If the router starts first, it can come up without an internet connection.

Is it bad to restart your router every day?

It won’t harm the hardware, but you shouldn’t need to. Needing a daily restart usually points to outdated firmware, overheating or a device near the end of its life.

How do I restart my router remotely?

Use your ISP’s app or your mesh system’s app if it supports remote access, or ask your ISP — many can restart their own equipment from their end. The web admin page usually works only from inside your home network.

Does restarting my router change my IP address?

Your devices’ local addresses usually stay the same. Your public IP address may or may not change, depending on your ISP — check it on our IP lookup before and after.

Related guides